High-end hardware solution for stereo and immersive set-ups
RME interfaces are now compatible with the SoundID Reference calibration profile, allowing you to export it directly onto the DSP and eliminating the need to run the software in the background. Calibrate, export, and forget – your audio is calibrated no matter the source.
Main features and benefits of this integration
Packed with professional features
RME interfaces are widely used for multitrack recording, mixing and mastering.
Unprecedented flexibility and compatibility
The Fireface UFX III is the center of any multitrack studio, handling up to 94 channels I/O with ease
Improved performance with minimal latency
RME offers a hardware solution which reduces Latency and CPU usage along with the overall convenience of not having to run separate software or plug-ins in the background or in your DAW
How it works?
Step 1
Measure your set up
Measure and calibrate your studio speakers using the microphone provided by following the steps in the set-up guide.
Step 2
Choose your target mode
Choose your calibration Profile and correct for the Dolby Atmos Music curve, flat frequency response or create custom profiles.
Step 3
Export your Profile
Export up to 32 unique Profiles directly to RME interface’s internal memory, watch as your settings are automatically adjusted.
Step 4
You’re Now Ready to Mix
Sit back and enjoy a consistent translation of your audio no matter what format you are working in.
Frequently asked questions
Do I need a SoundID Reference license to create an export profile?
↓
Do I need a SoundID Reference license to create an export profile?
Yes, profile export is available exclusively for users with a SoundID Reference perpetual license (not available with trial licenses).
Can I export a headphone calibration profile too?
↓
Can I export a headphone calibration profile too?
No, only speaker profile export is supported. Learn more here: Exporting a calibration profile for RME audio interfaces.
Which RME interfaces support the SoundID Reference Room EQ export functionality?
↓
Which RME interfaces support the SoundID Reference Room EQ export functionality?
UFX III, UFX II, UFX+, UCX II, Fireface 802 FS, HDSPe MADI FX rev2, and MADIface XT II.
How to export a speaker calibration profile for RME?
↓
How to export a speaker calibration profile for RME?
Follow the step-by-step instructions here: Exporting a calibration profile for RME audio interfaces.